skateboard
Matt Sefton

Make skate wax

You could buy skateboard wax in a skateshop for $5, but why not make them yourself? It's free, easy, and you can make it in any color or shape you want!

All you need is:


Start by cutting the candle into really small pieces. I used a colored candle, but you can always add crayons (in tiny pieces) for the color.



Pour some oil over the whole. Don't overdo it or you'll end up with a bowl of goo instead of wax. If you use too little, your wax will be less slippery.



Put the bowl in the oven until everything is completely melted. You could open the oven sometimes to stir (otherwise the oil might sink to the bottom).

A microwave might work, though I haven't tried it yet. Make sure not to microwave metal!

When it's all melted, it will smell horrible and look something like this:



Put it outside or on the windowsill to let it cool a little.



Put your wax a couple of hours in the refrigerator.



After some hours, poke the wax to feel if it's hard enough already. If so, you can take it out.

If you can't get the wax out of the can, you can cut it open, or heat the edges of the can to melt the sides a little.

Your skateboard wax should look something like this, but if it doesn't, don't worry... it might take a few tries to make really good wax.



Once you got this basic wax down, you can experiment with different shapes by pouring the molten wax into a mold.

Please press "Like" if this helped you

Similar guides you might like

Exoticblox
Exoticblox
great instructions! This was very easy to understand :)

7 July 2015 at 12:16

great instructions! This was very easy to understand
sk8erkid2315
sk8erkid2315
It really works :)

12 July 2015 at 21:39

It really works
kingzeke
kingzeke
imma try that out

29 October 2016 at 11:46

imma try that out

JOIN and get FREE skateboard stuff!

"Its a strange Phenomenon, how a piece of wood, wheels, and a turning system, has made so many people, so happy." - Chris Cole